Forum Discussion
CirrusLocal users account are not working in Big-iq.
MVPF5_SJ Any other local user that you create should work. Are you able to log in at all as this user or even the first login attempt doesn't work? Can you show us the settings for this new user?
F5_SJPaulius :The first login attempt is not working.
auth user new user {
encrypted password xxxx
partition Common
partition access {
all-partition {
role admin
}
}
shell tmsh
}
- Paulius
F5_SJ Based on that output this user will not be able to log into CLI at all but should be able to log into the GUI. I created a user using the same settings as what you provided on a BIG-IQ that I have access to and I was able to log into the GUI. If you have remote authentication configured on your BIG-IQ you do have to click the drop down menu on the login page for the BIG-IQ and change it to "local" in order for it to work properly. If you do have remote authentication configured such as TACACS+ configured and you do not see this option at login it has been disabled in the configuration and you will have to enable the option to make the appropriate selection. Other than what has been mentioned here, if this doesn't work I recommend opening a case with F5 to see if they have a solution to your issue.
