Forum Discussion
Load UCS to not active volume which is in version lower than originating (need this for script)
In my case I have two boot locations with different images versions (like below):
Volume Product Version Build Active Status
HD1.1 BIG-IP 12.1.2 0.0.249 no complete
HD1.2 ...
Leonardo_Souza
Cirrocumulus
CirrocumulusThere are 2 different things, one is copying the configuration and the other is loading the configuration.
I think cpcfg will only copy the configuration and will NOT load.
Basically, the same as you boot to a new volume selecting copy from another volume.
As you saw, and I know if you do via GUI, both cases will complain if the version is older.
The configuration will only load when you boot the system.
UCS only allows you to install in the same or later version.
In your case, use an SCF:
https://support.f5.com/csp/article/K13408