Forum Discussion
Blair_Murray_10
Nimbostratus
NimbostratusLoad Balancing UDP 514 Syslog traffic
We have a need to load Balance syslog traffic between 2 servers.
Created a Standard VS using Service Port 514 that sends traffic to the Pool of 2 Servers.
using a global SNAT so on the VS the ...
Subrun
Cirrostratus
CirrostratusWhats the logic of above while disabling with Allow SNAT to NO and again with iRule do a SNAT ?
Brad_Parker
Cirrus
CirrusIt's been quite a while since this original post, but I will try to help. There isn't really any logic in setting the pool to not allow SNAT and the iRule. Those were two different suggestions to overcome a global SNAT. The iRule should be sufficient on its own. If there wasn't a global SNAT the easiest solution is to simply turn Source Address Translation to none on the virtual server.
