Forum Discussion

Kalpesh_48932's avatar
Kalpesh_48932
Icon for Nimbostratus rankNimbostratus
Jan 08, 2013

Issue with SNAT

Hello, I have configured VIP with specific SNAT. snat IP is other than the LAN subnet. VIP works with AUTOMAP, however when specific SNAT configure is do not work,     below is the config of ...
config
design
Kalpesh_48932's avatar
Kalpesh_48932
Icon for Nimbostratus rankNimbostratus
Jan 08, 2013
SNAT is 10.155.70.144.

 

 

I checked trace for this IP from server and found traffic pointing correctly to core switches..but then its not going to F5

 

 

[cas@A92SV00498AGR ~]$ traceroute 10.155.48.84 -p 443

 

traceroute to 10.155.48.84 (10.155.48.84), 30 hops max, 40 byte packets

 

1 10.155.51.2 (10.155.51.2) 1.046 ms 1.023 ms 1.008 ms

 

2 10.155.48.84 (10.155.48.84) 0.665 ms 0.653 ms 0.601 ms

 

 

[cas@A92SV00498AGR ~]$ traceroute 10.155.70.144 -p 443

 

traceroute to 10.155.70.144 (10.155.70.144), 30 hops max, 40 byte packets

 

1 10.155.51.3 (10.155.51.3) 0.841 ms 0.813 ms 0.798 ms

 

2 * * *

 

 

 

I have route on core switches for SNAT IP

 

 

ip route 10.155.70.144/32 10.155.48.84

 

 

10.155.70.144/32, ubest/mbest: 1/0

 

*via 10.155.48.84, Vlan234, [1/0], 3w4d, static

 

 

Still it do not work