Forum Discussion
cmard_195831
Nimbostratus
Nimbostratusis the routing on the F5 the same as on a router ?
Hello,
I have an F5 and one of its interfaces is configured on a network e.g. 128.1.1.0 subnet 255.255.255.0.
On the same F5, I have another interface which is configured on the network 10.1.1.0...
nitass_89166
Noctilucent
Noctilucent1) Can this be done OR the F5 will act a router and since it knows that the two subnets belong to the device, it will do an internal packet transfer without going to the outside world (i.e. via the firewall) ?
if you are talking about traffic that is initiated from f5 (e.g. on f5 cli, ping 10.1.1.x), f5 will use interface 1.3 (not interface 1.2) to send icmp out.
if you are talking about traffic which is initiated from device (not f5) in 128.1.1.0 subnet, f5 can be configured to send traffic to 10.1.1.0 subnet via firewall and also be configured to send traffic to 10.1.1.0 subnet internally (not through firewall).
cmard_195831Nimbostratus
NimbostratusHello Nitass,
I am talking about :
if you are talking about traffic which is initiated from device (not f5) in 128.1.1.0 subnet, f5 can be configured to send traffic to 10.1.1.0 subnet via firewall
How can this be done ?
tx
BR
