Forum Discussion

ringoseagull_77's avatar
ringoseagull_77
Icon for Nimbostratus rankNimbostratus
Aug 11, 2010

Is it possible to change the network management interface IP remotely?

Set up: Pair of 1600s which were in active/standby mode. Active unit running 9.4.7. Standby unit running 10.1 but needs some reconfiguration to it's monitors before it can be brought back into the HA ...
config
design
hoolio's avatar
hoolio
Icon for Cirrostratus rankCirrostratus
Aug 11, 2010
Using the GUI might work. You could also group the commands on one line using semi-colons. But I'd suggest testing that on first another unit that you have other means of accessing in case you get the commands wrong. In general, I'd think you'd want to remove the mgmt route, remove the mgmt IP, add the new mgmt IP and then the new mgmt route (command1; command2; command3; command4).

 

 

Else, if you can get a spare IP on the existing mgmt network, you could configure the AOM with it and use that shell access to change the management IP via hostconsh.

 

 

Aaron