iRules scripts for IPv6 IPv4 translation

Hi,

 

I would like to configure BIG-IP 1500 as IPv6 IPv4 translator.

 

I configured Management, Internal, and External Network Configurations.

 

But, I don't know how to write scripts and activate for iRules.

 

Could you please tell me samples, or how to write it.

 

 

Environment I made are following:

 

 

[1] Management Network Configuration

 

IP Address: 192.168.1.100

 

Network Mask: 255.255.255.0

 

Management Route: 192.168.1.1

 

 

[2]Internal Network Configuration

 

Self IP Address: 3fe0:0:0:0:0:0:0:100

 

Netmask: ffff:ffff:ffff:ffff:0:0:0:0

 

Port Lockdown: Allow Default

 

VLAN Name: internal

 

VLAN Tag ID: 4094

 

Untagged: 1.3, 1.4

 

 

[3]External Network Configuration

 

Self IP Address: 192.168.2.1

 

Netmask: 255.255.255.0

 

Port Lockdown: Allow Default

 

VLAN Name: external

 

VLAN Tag ID: 4093

 

Untagged: 1.1, 1.2

 

 

[BIG-IP [2]]-[L3SW(Cisco)]-[Server(RHEL)(3fe0::2/64)]

 

[BIG-IP [3]]-[Client(WindowsXP)(192.168.2.2/24)]

 

 

Example for translation:

 

client:

 

HTTP/TCP/UDP/etc.. (destination 192.168.3.2/24)

 

BIG-IP

 

192.168.3.2<->3fe0::2/64

 

 

If you would like know any informations of the question,

 

Could you please ask me.

 

 

Sincerely Regards.

 

UTSUMI Hirotaka