Irule to log specific client IP to a syslog server

You can customize the way you want... Its going to be basic logging. You can create a DataGroup & add the IP's too. Then use the class match & verify with the DGL as well.

when CLIENT_ACCEPTED {
set client [IP::client_addr]
if { ( [IP::addr [IP::client_addr] equals 10.10.10.10] ) or ( [IP::addr [IP::client_addr] equals 20.20.20.20] ) or ( [IP::addr [IP::client_addr] equals 30.30.30.30] ) } {
log local0. "Client: $client has established a connection"      
 }
}

when HTTP_REQUEST {
set client_info [IP::client_addr]:[TCP::client_port]
set url [HTTP::header Host][HTTP::uri]
if { ( [IP::addr [IP::client_addr] equals 10.10.10.10] ) or ( [IP::addr [IP::client_addr] equals 20.20.20.20] ) or ( [IP::addr [IP::client_addr] equals 30.30.30.30] ) } {
log local0. "Client Source IP: $client_info is requesting URL: $url " 
}
}


when SERVER_CONNECTED {
set pool_name [LB::server pool]
if { ( [IP::addr [IP::client_addr] equals 10.10.10.10] ) or ( [IP::addr [IP::client_addr] equals 20.20.20.20] ) or ( [IP::addr [IP::client_addr] equals 30.30.30.30] ) } { 
log local0. "Client Source IP: [IP::client_addr]:[TCP::client_port] <--> POOL : $pool_name <--> ACTUALNODE <--> [IP::server_addr]:[TCP::server_port]" 
} 
}

You'll have to customise the rule below to add the events you are interested in, but you can use the format as a guide;

 

Notes: This presumes you have created a "MyThreeIps" DataGroup in the /Common partition that includes the three client addresses you are interested in.

 

It also presumes that you have added a pool in /Common that consists of one or more syslog servers for use with HSL. IF not, then comment out the hsl lines and uncomment the "log local" lines

 

when CLIENT_ACCEPTED { set hsl [HSL::open -proto UDP -pool /Common/syslog] log local0. "HSLocal $hsl"

 

}

 

when SERVER_CONNECTED { if { ([class match [IP::client_addr] equals /Common/MyThreeIps]) } { set FrontEnd "[IP::client_addr]:[TCP::client_port] <-> [clientside {IP::local_addr}]:[clientside {TCP::local_port}]" set BackEnd "[IP::local_addr]:[TCP::local_port] <-> [serverside {IP::remote_addr}]:[TCP::server_port]" Log connection details as local7.info; see RFC 3164 Section 4.1.1 - "PRI Part" for more info HSL::send $hsl "<190> LDAP HSL: $FrontEnd | $BackEnd" test by logging locally log local0. "$FrontEnd $BackEnd" log local0. "$hsl"

 

} }