Forum Discussion
daviddaoud2_205
Nimbostratus
NimbostratusiRule to change IP destination
Hello,
I want to define an iRule for the following scenario:
A----- BIGIP ----> B
when A sends a packet to B, BIGIP should send it to C_pool. In C_pool, there is only one...
daviddaoud2_205Nimbostratus
NimbostratusHmmm ... the problem is that this Adress Translation option has solved the issue but nothing works anymore ...
This has nothing to do with iRule of course but with my BIG-IP configuration which is quiet strange (used in transparent mode).
I'll better contact f5 to get support for that ... but as you guys seem brillant if you have any idea, feel free to share.
Quickly my configuration is:
1 VS for UDP on port 5060 (Standard)
4 servers physically connected to the BIG-IP
BIG-IP works in transparent mode so the self-ip never appears.
The problem is: once the Address Translation is activated, the packets stay blocked inside the BIG-IP. For example when eth0 (a phone) tried to contact eth1 (a call manager) I can see the packets entering in the BIG-IP but they never
go out to the interface eth1.
Any idea how to solve this?
Thx,
David