iRule matching destination address using VPN

Hello Kai,

I have used log local0. to see what the following are returning: [IP::remote_addr], [IP::client_addr], [IP::local_addr]

In my case I get the following:

[IP::remote_addr] = 193.108.5.* (public address of the client having the edge-client installed)
[IP::client_addr] = 193.108.5.* (same address as above)
[IP::local_addr] = 192.165.58.* (address of the VS the edge-client is connecting to)

What I can't see is the IP of the site I'm browsing to through the tunnel. If I open a browser and go to www.sunet.se I still get the same IP's returned from [IP::remote_addr], [IP::client_addr], [IP::local_addr].

I'd like to see the address of the site I'm connecting to 192.36.171.231 so I can use that as a matching condition in my iRule.

Any other tips on how to get this information in an iRule?

Regards

// Fredrik