Forum Discussion
Mohammed_M_Irfa
Nimbostratus
NimbostratusIPSec VPN Tunnel between routers via F5 LTM
Hi Folk,
Need your help to configure f5-LTM, to form an IPSec VPN tunnel between routers (Client end router and LB VPN router) using F5 LTM appliances in HA.
Scenario:
Client from bran...
Andy_McGrath
Cumulonimbus
Cumulonimbus-
I would start with Standard VS and ensure it is working first. Later you can change to Performance Layer 4.
-
-
-
Yes, under the pool set the pool members service port to be * (Any/All Services) then for the Virtual Server set the Service Port to also be * (Any/All Ports)
-
Host route is just a route for a /32 or a single IP address, not knowing your network setup you may not need this as you might not needs this. Basically you need to ensure client connection requests to the Virtual Server Address are routed to the F5 VLAN X.
