Forum Discussion
thomass87_91937
Nimbostratus
Nimbostratusinline configuration
Hi,
I have configuration:
NET => FW => F5 => SRV
I have VS1 which forwards traffic to SRV (no SNAT used, not possible to do XFF so source address of client is seen). F5 is def gw for SRV. O...
Hannes_Rapp_162
Nacreous
NacreousPlease paste full configuration of your 0.0.0.0/0 VS. There are many ways the routing can be done.
thomass87_91937Nimbostratus
Nimbostratusltm virtual forward-all {
destination 0.0.0.0%8:any
ip-forward
mask any
profiles {
fastL4-test { }
}
source 0.0.0.0%8/0
translate-address disabled
translate-port disabled
vlans {
server-vlan
}
vlans-enabled
vs-index 307
}
ltm profile fastl4 fastL4-test {
app-service none
defaults-from fastL4
loose-close enabled
loose-initialization enabled
reset-on-timeout disabled
}