Forum Discussion
carlos2tone_240
Nimbostratus
NimbostratusHTTPS load balancing
Hi there and thanks in advancing.
I'm trying to enable a load balacing including two server that use https and the access is by port 8443.
https://server01.myco.net:8443/SSFservice/SSFservi...
carlos2tone_240Nimbostratus
NimbostratusHi guys and many thanks for the replies.
Did not configure any ssl client/server certificate for this VS. In this case, the certificates on Pool servers were installed by a 3rd partner (it's requested by the way)
Do I have to set up client, server or both?
Do I have to configure SNAT Pool ?
I have a small remark, though it has no impact apparently, why aren't you using Pool_SX32_8443 as the VS default pool, do you really need a traffic policy?
Don't need traffic policy, but I configured it for testing purposes.
Cheers
- Brad_Parker
Cirrus
You will need both a client and server SSL profile if you are going to use https all the way to the pool members. SNAT pool is up to you. If you are using the LTM as the default route on you pool members there's no need for SNAT at all. If you expect more than 64,000 concurrent connections then you should plan on using a SNAT pool. If not, you can just use SNAT automap.
