Forum Discussion
fubarSUSHI
Altocumulus
AltocumulusHow to: download image from usb to a LTM device?
I realize this might be a stupid/simple question but I have a mass deployment and instead of getting into the gui and "importing" I want to use my usb and put the image (from usb) into /shared/images...
shaggy
Nimbostratus
NimbostratusTry out SOL9661: BIG-IP support for USB mass storage devices
If the devices are already on the network, you might try using an SCP client instead of the UI. SOL175: Transferring files to or from an F5 system.
fubarSUSHIThank you for the links. I guess I need to find what type of formats does the LTM read? I have/had a usb stick that was formated for exfat (so I can use the usb via mac (formatted on the mac) and read it on Windows.) But, when I did a fdisk... it shows something different HPFS/NTFS config fdisk /dev/sdc The number of cylinders for this disk is set to 3911. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/sdc: 32.1 GB, 32176472064 bytes 255 heads, 63 sectors/track, 3911 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 3912 31422335 7 HPFS/NTFS This format didnt work but once I formatted to ext3... it works. Do we know anything else that would work for mac/ltm?
