hung_37471
Sep 27, 2011Nimbostratus
How to config PBR
hi all
can you help me , how to config PBR on the BIg Ip ?
on the web GUI , i can't see anywhere to config PBR
thanks all
[root@iris:Active] config b virtual test list all
virtual test {
enable
limit 0
rate class none
mirror disable
translate address disable
translate service disable
srcport preserve
pool
snat none
cmp enable
cmp processor none
lasthop pool none
snatpool none
pool gw1
fallback persist none
destination any:any
mask 0.0.0.0
ip protocol tcp
partition Common
rules none
httpclass none
persist none
auth none
clone pools none
profiles tcp {
all
}
traffic classes none
vlans none disable
}
[root@iris:Active] config b pool gw1 list
pool gw1 {
members 172.28.17.254:any {}
}
[root@iris:Active] config b route list
No Routing Table Entries were found.
[root@iris:Active] config tcpdump -nni 0.0 -e port 80
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on 0.0, link-type EN10MB (Ethernet), capture size 108 bytes
12:13:18.896745 00:01:d7:20:81:85 > 00:01:d7:2f:0d:c3, ethertype 802.1Q (0x8100), length 78: vlan 4094, p 0, ethertype IPv4, 10.10.72.60.59619 > 8.8.8.8.80: S 865485221:865485221(0) win 5840
12:13:18.896802 00:01:d7:2f:0d:c3 > 00:01:d7:20:81:85, ethertype 802.1Q (0x8100), length 82: vlan 4094, p 0, ethertype IPv4, 8.8.8.8.80 > 10.10.72.60.59619: S 1705596133:1705596133(0) ack 865485222 win 4380
12:13:18.897850 00:01:d7:20:81:85 > 00:01:d7:2f:0d:c3, ethertype 802.1Q (0x8100), length 70: vlan 4094, p 0, ethertype IPv4, 10.10.72.60.59619 > 8.8.8.8.80: . ack 1 win 46
12:13:18.897925 00:01:d7:2f:0d:c4 > 00:01:e8:d5:d4:47, ethertype 802.1Q (0x8100), length 82: vlan 4093, p 0, ethertype IPv4, 10.10.72.60.59619 > 8.8.8.8.80: S 3006714883:3006714883(0) win 4380
5 packets captured
5 packets received by filter
0 packets dropped by kernel
[root@iris:Active] config b arp 172.28.17.254
ARP 172.28.17.254 - 00:01:E8:D5:D4:47 VLAN external expire 269s resolved