I tried routing the HA self IP to each other instead of the whole subnet - now i got a different error.
StatusSync Failed
SummaryA validation error occurred while syncing to a remote device
Details
Sync error on HAR-: Load failed from TC- 01070330:3: Static route gateway 172.16.73.9 is not directly connected via an interface.
Recommended action: Review the error message and determine corrective action on the device
I have it working with having both HA self IP's on the same network and trunking the network between the DC's using a vlan. This is OK until the leased line goes down then both boxes will become active. Atleast before by using different HA networks i could route them via the ASA which would handle the failover if the leased line died and route it via the MPLS.
How can i achieve redundancy using the MPLS link with the F5's? IS there a secondary HA link/method i can use?
Many thanks if you know the answer :)
Matt