Forum Discussion
sandy16
Altostratus
AltostratusGTM - iquery over internet and sync.
Hi, we are doing a GTM deployment across 2 x DCs. So there is 1 x GTM and a LTM pair in each DC. Lets name them as follows -
DC1 - has GTM1 and LTM-pair1
DC2 - has GTM2 and LTM-pair2
We are running...
Maverick_80689
Nimbostratus
NimbostratusI think you will need to setup two pools using both private and public ips and then mark the local GTM as the stat collection server over private ip address. But it depends how you are monitoring the LTM health.
sandy16That`s what my question is. If monitoring the remote DC - ltm over the internet then we use public ip and NAT it on the interent firewall to the corresponding private ip. But, if we sync the 2nd GTM with the 1st one, we want the LTM entries to be reversed in terms of public/private ip. I believe this is very common to monitor the remote LTM by using iquery over the internet from the GTM. Has anyone done this? Any takers out there??
George_33482Hi, I am in the same situation here, what was the verdict. how do we configure this setup? Thank you
