Forum Discussion
AltostratusFailover object missing in traffic group
Hello Folks,
When we cannot see an object within failover objects and how to add it manually?
I have a VS, which isn't appearing in Failover objects. And strange thing is, for that specific VS, traffic goes to standby appliance and that is actually processes the traffic. As a result the VS servers intermittent services and looses the connection and functionality anytime. I have tried creating a new VS, however that behaves the same way. And again that VS is not reflecting to failover objects.
Any clues?
Thanks,
Darshan
14 Replies
- nitass
Employee
As soon as i create a network virtual server, the sync fails. Any ideas how to fix this.
have you checked /var/log/ltm? what was there?
aj1Nimbostratus
Thank you nitass for the reply. Turns out i had different external vlans on the HA pair (since we are not using floating-IPs externally and the links are all /30s). As soon as i re-created those external vlans (now with same name on both units) config-sync started working.
swo0sh_gt_13163Hello Aj,
Yes, as mentioned by Nitass, it was an open issue in my case. You may refer the articles shared by Nitaas as above, however I would expect it to not appear in 11.5.0 or later, as the issue seems to be fixed from 11.4.1 onwards.
Cheers! Darshan
- aj1Yes, it was a config issue at my end. Works now. Thanks!
