Forum Discussion

Luca_55898's avatar
Luca_55898
Icon for Nimbostratus rankNimbostratus
Jul 11, 2011

Failover event detected.... not sure why

Can anyone shed some light on the following logs:

 

We have two LTMs in a HA config. Not sure if the devices are actually failing over or not....

 

 

Mon Jul 11 11:48:24 EST 2011 notice local/LB003 sod[5151] 01140045 HA reports tmm NOT ready.

 

Mon Jul 11 11:48:24 EST 2011 notice local/LB003 sod[5151] 010c0050 Sod requests links down.

 

Mon Jul 11 11:48:25 EST 2011 info local/LB003 lacpd[5133] 01160016 Failover event detected. (Switchboard failsafe disabled while offline)

 

Mon Jul 11 11:48:25 EST 2011 err local/LB003 bcm56xxd[4993] 012c0010 Failover event detected. Marking external interfaces down. bsx.c(3276)

 

Mon Jul 11 11:48:25 EST 2011 info local/LB003 bcm56xxd[4993] 012c0015 Link: 1.15 is DOWN

 

Mon Jul 11 11:48:25 EST 2011 info local/LB003 bcm56xxd[4993] 012c0015 Link: 1.16 is DOWN

 

Mon Jul 11 11:48:25 EST 2011 info local/LB003 bcm56xxd[4993] 012c0015 Link: 3.1 is DOWN

 

Mon Jul 11 11:48:25 EST 2011 info local/LB003 lacpd[5133] 01160016 Interface 1.15, link admin status: enabled, link status: down, duplex mode: half, lacp operation state: down

 

Mon Jul 11 11:48:25 EST 2011 info local/LB003 lacpd[5133] 01160010 Link 1.15 removed from aggregation

 

Mon Jul 11 11:48:25 EST 2011 info local/LB003 bcm56xxd[4993] 012c0015 Link: 3.2 is DOWN

 

Mon Jul 11 11:48:25 EST 2011 info local/LB003 lacpd[5133] 01160016 Interface 1.16, link admin status: enabled, link status: down, duplex mode: half, lacp operation state: down

 

Mon Jul 11 11:48:25 EST 2011 info local/LB003 lacpd[5133] 01160010 Link 1.16 removed from aggregation

 

Mon Jul 11 11:48:25 EST 2011 info local/LB003 lacpd[5133] 01160016 Interface 3.1, link admin status: enabled, link status: down, duplex mode: half, lacp operation state: down

 

Mon Jul 11 11:48:25 EST 2011 info local/LB003 lacpd[5133] 01160010 Link 3.1 removed from aggregation

 

Mon Jul 11 11:48:25 EST 2011 info local/LB003 lacpd[5133] 01160016 Interface 3.2, link admin status: enabled, link status: down, duplex mode: half, lacp operation state: down

 

Mon Jul 11 11:48:25 EST 2011 info local/LB003 lacpd[5133] 01160010 Link 3.2 removed from aggregation

 

Mon Jul 11 11:48:35 EST 2011 notice local/LB003 sod[5151] 01140029 HA daemon_heartbeat tmm5 fails action is go offline down links and restart.

 

Mon Jul 11 11:48:35 EST 2011 notice local/LB003 sod[5151] 010c003e Offline

 

Mon Jul 11 11:48:35 EST 2011 notice local/LB003 sod[5151] 01140044 HA reports tmm ready.

 

Mon Jul 11 11:48:35 EST 2011 notice local/LB003 sod[5151] 010c0018 Standby

 

Mon Jul 11 11:48:36 EST 2011 info local/LB003 lacpd[5133] 01160016 Connected to failover service.

 

Mon Jul 11 11:48:36 EST 2011 info local/LB003 bcm56xxd[4993] 012c0012 Connected to failover service.

 

Mon Jul 11 11:48:36 EST 2011 notice local/LB003 sod[5151] 010c0048 Bcm56xxd and lacpd connected - links up.

 

Mon Jul 11 11:48:38 EST 2011 info local/LB003 bcm56xxd[4993] 012c0015 Link: 3.1 is UP

 

Mon Jul 11 11:48:38 EST 2011 info local/LB003 bcm56xxd[4993] 012c0015 Link: 3.2 is UP

 

Mon Jul 11 11:48:39 EST 2011 info local/LB003 bcm56xxd[4993] 012c0015 Link: 1.15 is UP

 

Mon Jul 11 11:48:39 EST 2011 info local/LB003 bcm56xxd[4993] 012c0015 Link: 1.16 is UP

 

Mon Jul 11 11:48:40 EST 2011 info local/LB003 lacpd[5133] 01160009 Link 1.15 added to aggregation

 

Mon Jul 11 11:48:40 EST 2011 info local/LB003 lacpd[5133] 01160009 Link 1.16 added to aggregation

 

Mon Jul 11 11:48:40 EST 2011 info local/LB003 lacpd[5133] 01160009 Link 3.1 added to aggregation

 

Mon Jul 11 11:48:40 EST 2011 info local/LB003 lacpd[5133] 01160009 Link 3.2 added to aggregation

 

  • Hello Hajar, For your information, problem was never solved for us. We upgraded to 12.0.0 and the failovers issue reappeared. F5 provided us and Engineering Hotfix HF0-ENG42 which works. The fact is more and more of our users have Windows 10, and 12.0.0 does NOT support Windows 10. I tried to upgrade to the then latest version, 12.0.0HF2 and the same failovers issue reappeared after a few days. Only way to have a working situation is to stay with Engineering Hotfix, but with no Windows 10 support. We are moving away from F5 since we don't have neither proper support nor trust anymore. Too bad. Good luck and please keep us up to date with your current case :)

     

    • Eduardo_de_Oliv's avatar
      Eduardo_de_Oliv
      Icon for Nimbostratus rankNimbostratus

      Since I have upgrated for the version 11.6 HF5, ihad no problem anymore. I wnat upgrate to 12.0 i'm really scared for the case of it back happens