Forum Discussion

Mark_388113's avatar
Mark_388113
Icon for Nimbostratus rankNimbostratus
Apr 09, 2019

failed to sync config to peer

Hi Friends,

 

I encountered a issue about config-sync of BIGIP VE lab environment, HA is established(active/standby) but the status is "Not All Devices Synced" all the time, one of member's sync status is always "Does not have the last synced configuration". I tried v11.6.0/v11.5.3 and rebuild the config several times but still the same, config cannot be sync to peer device. Kindly help me with this frustrating issue and let me know if something missed. Thanks a lot!

 

application delivery
BIG-IP
config-sync
ha
LTM
v11.5.3
v11.6.0
ve edition
  • Mark_388113's avatar
    Mark_388113
    Icon for Nimbostratus rankNimbostratus
    Apr 09, 2019

    Below logs recurs all the time:

     

    Tue Apr 9 22:46:44 CST 2019 notice b mcpd[6122] 01070430 end_transaction message timeout on connection 0x5dd5dcc8 (user %cmi-mcpd-peer-1.1.1.1)

     

    Tue Apr 9 22:46:44 CST 2019 notice b mcpd[6122] 01070418 connection 0x5dd5dcc8 (user %cmi-mcpd-peer-1.1.1.1) was closed with active requests

     

    Tue Apr 9 22:46:44 CST 2019 notice b mcpd[6122] 0107143c Connection to CMI peer 1.1.1.1 has been removed

     

    Tue Apr 9 22:46:44 CST 2019 notice b mcpd[6122] 0107143a CMI reconnect timer: enabled

     

    Tue Apr 9 22:46:44 CST 2019 notice b mcpd[6122] 01071431 Attempting to connect to CMI peer 1.1.1.1 port 6699

     

    Tue Apr 9 22:46:45 CST 2019 notice b mcpd[6122] 01071432 CMI peer connection established to 1.1.1.1 port 6699

     

    Tue Apr 9 22:46:47 CST 2019 notice b tmm1[15586] 01010045 Bandwidth utilization is 2 Mbps, exceeded 75% of Licensed 2 Mbps

     

    Tue Apr 9 22:46:49 CST 2019 notice b mcpd[6122] 0107143a CMI reconnect timer: disabled, all peers are connected

     

    Tue Apr 9 22:46:50 CST 2019 notice b tmm1[15586] 01010045 Bandwidth utilization is 2 Mbps, exceeded 75% of Licensed 2 Mbps

     

    And for below log, I did the recommend action refer to https://support.f5.com/csp/article/K41410404, but NO help.

     

    Tue Apr 9 23:04:55 CST 2019 notice a mcpd[6138] 0107168e Unable to do incremental sync, reverting to full load for device group /Common/device-group-failover-3db2999372c2 device %cmi-mcpd-peer-/Common/ from commit id { 181 6677707717753328718 /Common/ } to commit id { 7 6677708611259334130 /Common/ }.

     

  • youssef1's avatar
    youssef1
    Icon for Cumulonimbus rankCumulonimbus
    Apr 10, 2019

    Hi,

     

    So first of did you manage this notification:

     

    Bandwidth utilization is 2 Mbps, exceeded 75% of Licensed 2 Mbps

     

    THis notification occur when The throughput rate exceeds a percentage of the maximum licensed throughput rate on the BIG-IP system https://support.f5.com/csp/article/K99532652

     

    keep in mind that the HA link also consumes bandwidth. so the mirroring and synchronization part increases your bandwidth and impacts your license which only restricts you 2 Mbps... but that's another problem.

     

    What I recommend at first is to change your synchronization method:

     

    • edit your device group (Device Management ›› Device Groups ›› dg-name)
    • switch "Sync Type" to "Manual with full sync".

    Keep me in touch.

     

    regards