Forum Discussion
Shazee
Altocumulus
AltocumulusF5 VE in AWS HA config
F5 VE with 2 NICs.
One facing Private and other facing public subnet. (1.0 - Facing Private and 1.1 Public )
(Both Private and Public are RFC 1918 addresses as F5 resides below a NLB in AWS )
Management is through private ip address range .
I could not find a support document to configure HA across multiple availability zones ( 1 VPC with 3 AZs )
Would like to configure the device cluster and config sync only through private subnet.
https://aws.amazon.com/solutionspace/solutions/f5-networking-on-aws/ (with an NLB on top instead of a ELB)
If you want across AZ, then we have a few options there too. You can use an AWS LB in front...or you can failover by using the scripts loaded into the BIG-IP VM instances which use the Cloud Failover Extension by F5 for HA.
install docs if doing manual: https://clouddocs.f5.com/products/extensions/f5-cloud-failover/latest/userguide/aws.html
HI Shazee, have you tried to do a test deploy of the CFT template we have on our F5 Networks GitHub? The templates currently deploy with single-nic BIG-IP instances when going behind a tier 1 device for autoscaling. Do you have a requirement for 2-nics?
omar_padillaI have a question if they are across az, should they go under elb anyway? Could you handle it directly with elastic ip?
