Forum Discussion

MartinVKonov_15's avatar
MartinVKonov_15
Icon for Nimbostratus rankNimbostratus
May 29, 2014

F5 LTM Transparent mode configuration

Dear All,   I am trying to configure BIG-IP LTM device to work in transparent mode in order to replace Cisco ACE device. I have already done several configurations but the results are not so good...
application delivery
cisco
LTM
MartinVKonov_15's avatar
MartinVKonov_15
Icon for Nimbostratus rankNimbostratus
May 31, 2014

Hi Nitass,

 

Thank you very much for your answer I found it really useful but I am still working on my issue. My configuration is the same as yours but the problem is still there I will looking for some network issue because that is the only point for now. As addition are you using a Virtual F5 or Hardware one ?

 

I tried with the virtual one deployed over ESXi host and I noticed that the packet which are leaving the ESXi host are untagged. It looks like the ESXi remove the tag or F5 doesn't add them. Really strange beside the fact that in the tcpdump all looks fine.

 

Again thank you very much for your help.