Forum Discussion
CirrusF5 | LTM | Server Hello packet is not coming
MVPRAQS can you please provide the configuration of the virtual server so we can look at this a bit more in depth? My first guess is that because you aren't performing SSL termination you most likely have a configuration option applied that is attempting to look at the at the traffic, such as an HTTP profile, and those settings might cause this behavior for you.
RAQSdestination 10.11.11.1:443
ip-protocol tcp
mask 255.255.255.255
persist {
abc_Dest_Addr {
default yes
}
}
pool abc.com_https
profiles {
abc.com.com_TCP_Timeout { }
}
serverssl-use-sni disabled
source 0.0.0.0/0
source-address-translation {
type automap
}
translate-address enabled
translate-port enabled
vs-index 477
}- Paulius
RAQS May I have the configuration of that abc.com.com_TCP_Timeout profile because based on the rest of that configuration this should work, this is all assuming that the appropriate firewall rules are in place to allow you to reach the F5 and the F5 to reach the pool members on the self-IP closest to the destination pool members.
