Forum Discussion
VR12
Altostratus
AltostratusF5 - nPath configuration - display maintenance page
HI our application vendor recommend we implement nPath (direct server return) - which we did with the help of F5 support ... it took several engineers but we were able to implement nPath and ...
Paulius
MVP
MVPVR12from my understanding nPath should only mess with return traffic when the server receives the request. If you are attempting to implement a maintenance page that should be logic that is used prior to sending the traffic from the BIG-IP to the server. You should be able to use an iRule with a maintenance page to perform this.
VR12Thanks Paulius - we just want to display a under maintenance page - at this time we do not care about having it automatically displayed when the POOL is down ..... we will enable it manually.
So to explain we have iRule set for nPath to work .... as per the articles they mention a standard setup to auto display maint page when pool is down ...... and following the article it can not be configured because rule is configured different for nPath.
Servers will be down for maint so POOL will be down ... so we are looking for a way to have the maint page enabled at that time.
Would it be possible to have 2 profiles for the same VIP --- and enable as needed .. prod or maint.
Sorry our F5 is managed by a different group.. and looking for suggestions so we can ask them try ..as we have been been told its not possible in nPAth config ... BUT again if pool is down we are not using nPath.
Many Thanks for any suggestions....
- buulam
Admin
You won't be able to have 2 VIPs with the exact same IP/port combo but since you're doing this manually, you could always have a bogus port specified for the maintenance page VIP and your manual process is simply adjusting the port.
- VR12
Thank you Buulam - there is a part I don't understand - So
We have DNS entry to sample.com vip (config uses nPath) set to , lets say just to discuss, to 10.0.0.15 with pool of 2 servers that will be down for maintenance.
So we would create a New VIP with 10.0.0.20 and ???
how would we point sample.com to new VIP or maint page from new VIP to respond to requests to 10.0.0.15 sample.com ( don't care to much for doing DNS changes since have to deal with caching - tried that already.)
Many Thanks ...
VR12
