Forum Discussion
f5beginner
Cirrostratus
CirrostratusExceed bandwidth utilization on standby device
Hello All, I have two virtual F5 in HA, one of them Active and second one is in standby mode. From my monitoring I received ping delay, which is around 400ms, so I checked logs on F5. On acti...
Yes, the problem you are facing is because of this UDP 8116 traffic. There are 360 packets (of 500) related to this flow.
# cat output.txt | grep 8116 | wc -l 360This is not a specific problem of F5, so you should check your enviroment to figure out what the source of traffic is and how to stop it.
BTW, I would appreciate if you mark my answer as 'the best' or give me some upvote :-).
KR,
Dario.
f5beginnerCirrostratus
CirrostratusHi, I have checked connections but on standby device, there is 68 connections only, on Active there are much more. I do not use any 3rd party script.
I have checked tcpdump, it looks there is lot of broadcast from checkpoint, isn´t there ?
I attached txt file and packet to zip, could you please check it ?
Thank you
Yes, the problem you are facing is because of this UDP 8116 traffic. There are 360 packets (of 500) related to this flow.
# cat output.txt | grep 8116 | wc -l 360This is not a specific problem of F5, so you should check your enviroment to figure out what the source of traffic is and how to stop it.
BTW, I would appreciate if you mark my answer as 'the best' or give me some upvote :-).
KR,
Dario.
