Forum Discussion
Rene_125890
Nimbostratus
NimbostratusEstablish comunication from the nodes of a pool to the LAN
I have the following topology: There is an F5 BigIP LTM and behind it there are 2 Bluecoat Proxies. These BC are pool members of a pool.
I created a VS, I used the performance (layer 4) profile, I as...
MiLK_MaNNimbostratus
NimbostratusYou can create another virtual server that listens on the VLAN of the BC's, is a 0.0.0.0/0 destination, and has a pool member of the upstream router from the F5. This will essentially make the BIG-IP act as a router for your BC's back into your network.
I would probably do some more intelligent load balancing with your BC's as well instead of having a destination port of 0. You've probably done this to simplify configuration to allow for multiple protocols to be load balanced, but you are missing out on intelligent features like CARP as an example.
Rene_125890Nimbostratus
NimbostratusHello. I created the VS but it didn't work.
There's an issue that I have to mention. The segment assigned to the BC's Proxies is not routed in the LAN. I tried using an SNAT so the request went to the AD from the F5 IP Address, but It didn't work too.
I use instead a NAT and finally I had the connection between the BC Proxy with the AD vía a BCAAA Server.
