Forum Discussion
NimbostratusError when trying to upgrade VE LTM
I am trying to go from 11.4.1 to 11.6.0 on a VE LTM lab edition. I have re-activated my license, uploaded the new 11.6.0 ISO, and installed it. But when I try to change the boot location to the new location and hit activate, I get the following message, and it will not reboot. Thanks.
info: >++++ result: info: mount: proc already mounted or /mnt/tm_install/18834.r6vuPw/proc busy info: mount: according to mtab, proc is already mounted on /mnt/tm_install/18834.r6vuPw/proc info: >---- error: status 8192 returned by command: mount -t proc proc /mnt/tm_install/18834.r6vuPw/proc Could not access configuration destination; sda, 2 . umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy umount: /mnt/tm_install/18834.r6vuPw: device is busy
2 Replies
Andy_McGrathCumulonimbus
I have this before long time ago (think 11.2 to 11.4), try upgrading to 11.5.x first then to 11.6.0. Personally I ended up building a new VE, on the later version, and migrating the cofiguration over as the upgraded VE always had minor issues never sure if was due to the upgrade or not.
jrmorris_151361I was able to figure out what was happening...
I selected 'Yes' under Install configuration and chose the wrong path as the source path. Everything works fine if I select 'No' for install configuration.
