Forum Discussion

Yann_Desmarest_'s avatar
Yann_Desmarest_
Icon for Nacreous rankNacreous

Hello,

If you can reach the F5 or the F5 can reach all required resources without any default gateway, it's fine, no need to add a route. Otherwise, you will need to add a default route on Network >> Route or using a tmsh command :

create /net route 0.0.0.0/0 gw 30.99.99.254

No need to take care of the route domain. If you don't specify any route domain in the route configuration it's a route used within route domain 0.

Yann_Desmarest_'s avatar
Yann_Desmarest_
Icon for Nacreous rankNacreous
May 06, 2016
Simple, if the destination you try to reach is directly connected to the F5 by a Self IP, it's fine. If you are able to reach a destination that is not directly connected, the traffic probably use the management port. To make sure, you can launch a tcpdump command on the cli and see if there is traffic outgoing to the mgmt