Direct traffic to specific member of a pool & load balance between two pools

Hi Munim,

 

Yes it is possible.

 

 

You can create Pool for the UTI servers and a pool for the PF servers and assign them to their corresponding VIPs.

 

Also you can monitor servers that are not part of the pool but are a dependency without having them in the same pools. There is a feature in the monitor profiles where you can monitor a different set of servers with having it be a member of the same pool.

 

 

For example:

 

 

You have a VIP that is associated to a pool with 2 nodes. The structure looks like the following

 

 

VIP:HTTP

 

|

 

|-> Pool HTTP_POOL

 

|

 

|------>IP: 192.168.12.20:80

 

|

 

|------>IP: 192.168.12.21:80

 

 

Now you have a monitor at the pool level check to make sure PORT 80(HTTP) is responding. However, you need to also monitor another port on a speperate server with an address 192.168.50.12 on port 2343. Then what you do is create a seperate monitors which as the Alias Address: 192.168.50.12 with the alias service port 2343. Then all you need to do is add that monitor to the HTTP_POOL above.

 

 

I hope this helps

 

 

Bhattman