Forum Discussion
sysAdm
Altocumulus
AltocumulusDirect connect 2 rSeries
Hi, We're going to buy 2 rSeries 2000 (or 4000) and put in 2 buildings in our sites, with distance over 500m. Can we use single mode FC cables to connect the 2 units for the HA network? As...
Hey Hi, yes, you can use single-mode FC cables for HA network between the rSeries units. You can also use 2 FC cables for redundancy. Special SPF+ for single-mode FC cable.
Hello, yes adding a management IP address as failover in case the HA network in a DSC is down is possible.
Thank you.
sysAdmAltocumulus
AltocumulusHi, thanks for your help.
We can form LACP LAG using the 2 FC cables, right?
Besides link level redundancy, seems can add management IP address as failover IP in case the HA network in a DSC is down?
Sorry for the newbie questions.
Thanks and Rgds
UshavilashAltocumulus
AltocumulusHello, yes adding a management IP address as failover in case the HA network in a DSC is down is possible.
Thank you.
- sysAdm
Got it. Thanks a lot.
- Ushavilash
It sounds great that you got answer.