Forum Discussion
harry_35316
Jul 03, 2012Nimbostratus
Hi, The statistics are changing but the current connections remaiin the same.. The latest virtual server show output is given below.
Also no irules are being implemented in this VS. Given configuration of VS as well.
LTMb virtual vs_12405 show
VIRTUAL ADDRESS 10.62.138.91 UNIT 1
| ARP enable
| (cur, max, limit, tot) = (59, 3320, 0, 9.668M)
| (pkts,bits) in = (301.0M, 233.7G), out = (385.5M, 3.964T)
+-> VIRTUAL vs_12405 SERVICE 12405
| PVA acceleration none
| (cur, max, limit, tot) = (59, 1320, 0, 3.241M)
| (pkts,bits) in = (158.0M, 120.4G), out = (181.4M, 1.890T)
| requests (total) = 10.03M
+-> POOL pool_12405 LB METHOD round robin MIN/CUR ACTIVE MEMBERS 0/0
| (cur, max, limit, tot) = (0, 2589, 0, 3.636M)
| (pkts,bits) in = (111.2M, 92.04G), out = (181.2M, 1.823T)
+-> POOL MEMBER pool_12405/10.62.12.44:12405 active,unchecked
| | session enabled priority 0 ratio 1
| | (cur, max, limit, tot) = (0, 646, 0, 890827)
| | (pkts,bits) in = (26.84M, 22.20G), out = (43.63M, 438.5G)
| | requests (total) = 2.245M
+-> POOL MEMBER pool_12405/10.62.12.44:12407 active,unchecked
| | session enabled priority 0 ratio 1
| | (cur, max, limit, tot) = (0, 646, 0, 889329)
| | (pkts,bits) in = (27.03M, 22.36G), out = (43.94M, 442.0G)
| | requests (total) = 2.268M
+-> POOL MEMBER pool_12405/10.62.12.81:12405 active,unchecked
| | session enabled priority 0 ratio 1
| | (cur, max, limit, tot) = (0, 634, 0, 913810)
| | (pkts,bits) in = (28.10M, 23.22G), out = (45.85M, 461.7G)
| | requests (total) = 2.360M
+-> POOL MEMBER pool_12405/10.62.12.81:12407 active,unchecked
| session enabled priority 0 ratio 1
| (cur, max, limit, tot) = (0, 663, 0, 942947)
| (pkts,bits) in = (29.27M, 24.25G), out = (47.83M, 481.2G)
| requests (total) = 2.465M
LTM b VS_12405 list
virtual VS_12405 {
snat automap
pool pool_12405
destination 10.62.138.91:12405
ip protocol tcp
persist cookie_global_e
profiles {
global-http-profile {}
VS_oneconnect {}
serverssl {
serverside
}
tcp {}
ssl_cert {
clientside
}
}
}
LTM b profile VS_oneconnect list
profile oneconnect VS_oneconnect {
defaults from oneconnect
}