Forum Discussion
mschott_355664
Nimbostratus
NimbostratusDeploy VE 13.1.1.2 VMware
Hello guys, I'm new in the F5 world and for study purposes, I'm deploying a VE appliance in the VMware, after doing the deploy I can't ping and access by web browser the F5. I set the correct VLAN in...
You have to allow tcp ports 22 and 443 in order to have access to the CLI and web GUI.
HERE is a good source of information.
Hope that helps! If it does please up-vote and select this answer, it'd be greatly appreciated!
-Dylan
Dylan_375544
Cirrocumulus
CirrocumulusYou have to allow tcp ports 22 and 443 in order to have access to the CLI and web GUI.
HERE is a good source of information.
Hope that helps! If it does please up-vote and select this answer, it'd be greatly appreciated!
-Dylan
mschott_355664Hi Dylan, yes, the 22 and 443 port are allowed. Another thing is that the LTM can't ping his gateway. Seems with a VLAN problem, but I checked and not found nothing wrong.
- Dylan_375544
Yeah it could be a VLAN problem, but I would start with checking your interfaces on VMware. You may have to configure your interfaces in VMware if you haven't. Also, read through that article as there is a plethora of helpful information in it.
- mschott_355664
ok Dylan, I'll read the article. Thank you for now