Forum Discussion
Cannot access the internet using a default gateway virtual server
- Nov 28, 2014
You must disable address and port translation on your Virtual Server. These are under the "Advanced" configuration. Without that, all traffic will be forwarded to the pool member using it's IP address as the destination. Moreover, assuming you want to forward more than TCP traffic, you must change the Protocol to "*All Protocols". You almost certainly want to limit the VS to just your internal VLAN (change "VLAN and Tunnel Traffic" to "Enabled on..." and move the internal VLAN to the "Selected" box).
Incidentally, this can be achieved a different way. If you set the BIG-IP default route to 172.16.100.17, you could then use a "Forwarding (IP)" Virtual Server type, which uses the BIG-IP route table to forward traffic.
- May 12, 2016I had the same problem and I found the solution by changing the vmnet0 bridge from automatic to the associated Network Ethernet Adapter. Vmware>Edit>Virtual Network Adapter>vmnet0
Are you looking for SSL-Labs rating? @Kai has already publish article to get Qualys SSL-Labs rating.
Please go through it. Link
Hi, yea i got the string from there only . My question I can simply add the string in the cipher text field
Thanks
davidy2001you are receiving the "Authentication failure" because you have to enter the default password again and after that it will prompt you for the new password. Notice that it says "(current)" next to "UNIX password:" meaning the password that you entered when you first logged in. UNIX does this as a safe guard essentially so that if for some reason a user was left logged in you couldn't just change the password to a new one without knowing what the current password is.
Recent Discussions
Related Content
* Getting Started on DevCentral
* Community Guidelines
* Community Terms of Use / EULA
* Community Ranking Explained
* Community Resources
* Contact the DevCentral Team
* Update MFA on account.f5.com