Forum Discussion
Eric_Lenington_
Nimbostratus
NimbostratusDatagroup / Access class match not working.
I have the following iRule and the redirect is working well. However, I want to restrict the clients that connect. Can someone help me out with a recommendation? I have tried the below addition to no...
Sets the connection to forward IP packets. This is strict forwarding and will bypass any pool configured on the virtual server.
The request will be forwarded out the appropriate interface according to the routes in the LTM routing table. No destination address or port translation is performed.
Try removing your forward command and changing up your iRule logic.
when CLIENT_ACCEPTED { if { ![class match [IP::client_addr] equals mynetwork] } { discard } } when HTTP_REQUEST { HTTP::redirect http://my.website.com/main/MWS-autologin.cfm?x=testing123four }Hope this helps.
Michael_YatesNimbostratus
NimbostratusSets the connection to forward IP packets. This is strict forwarding and will bypass any pool configured on the virtual server.
The request will be forwarded out the appropriate interface according to the routes in the LTM routing table. No destination address or port translation is performed.
Try removing your forward command and changing up your iRule logic.
when CLIENT_ACCEPTED {
if { ![class match [IP::client_addr] equals mynetwork] } {
discard
}
}
when HTTP_REQUEST {
HTTP::redirect http://my.website.com/main/MWS-autologin.cfm?x=testing123four
}
Hope this helps.
Eric_Lenington_Thank you Michael you have been a great help. Although both answers ultimately were able to assist us.