Forum Discussion

Mike_61640's avatar
Mike_61640
Icon for Nimbostratus rankNimbostratus
Sep 03, 2012

Creating VS for a network not directly connected

Hi,   I have a network that has a DMZ (10.1.1.0/24) and an Internal (10.2.2.0/24) network directly connected to the F5 LTM. The Internal network also has access to other networks (172.16.0.0/24) ...
config
design
Mike_61640's avatar
Mike_61640
Icon for Nimbostratus rankNimbostratus
Sep 04, 2012
I went through and checked everything listed in your comments and they all seem to be in order. I have static routes for these networks and a Forwarding (IP) setup for the 172.16.0.0/24. I guess I just wanted to make sure that it would grab allow/grab this traffic if these networks were not directly connected. I know that standard VS's don't and wanted to confirm that the Forwarding (IP) VS didn't act the same way.

 

 

It still may be their application, I'm going to run more tcpdumps and see if I can find the problem.

 

 

Thanks for the help,

 

Mike