Forum Discussion
Hannes_Rapp_162
Nacreous
Device Management > Traffic Groups > Your-Traffic-Group > Default Device
A default device is the device on which you want a traffic group to run if possible. You actively specify a default device for a traffic group when you create the traffic group. When a traffic group floats due to failover, the BIG-IP system selects the default device as the target failover device whenever that device has the same or more availability as other group members to process traffic. For example, suppose that during traffic group creation you designated Device B to be the default device. If failover occurs and Device B and Device C have the same availability, the traffic group will fail over to Device B. The default device designation is a user-modifiable property of a traffic group.
For additional security you may disable the uplink network interface on the node you wish to become standby. Don't forget to re-enable it once "Traffic groups" and "Device Groups" sections are configured.
NikhilB
Feb 11, 2015Employee
Just to clarify the posting you mentioned; if TG1 is active on device A (and A is also the default device for TG1): if device A reboots and causes a failover to its peer (B), the TG1 will remain on device B unless auto failback is ofcourse configured. Do you see under any circumstances where it would failback to A after a failover event? (minus auto failback)