Forum Discussion
krish90
Nimbostratus
NimbostratusConnections not flowing equally to pool with same pool member ip and different port
We have two VIP for HTTP and HTTPS and its configured with single same pool in F5. And the pool members configured with mixed port like same ip configured with 80 and 10200 port. We have observed a u...
krish90Nimbostratus
NimbostratusHi yes I have verified below items and its enabled on both VIP ( HTTP and HTTPS )
- Port Transaltion
- Address Translation
Yes all members are up and showing like online and attached with pool( total member count is eight ). And 7 members configured with 10200 port and 1 member alone configured with 80 port.
Hello,
Based on the below answer in this link, the port translation is the only mandatory option to allow traffic on different pool members ports.
you can check the pool statistics and see whether F5 is sending traffic to this pool member *80* or no traffic is sent at all. Also, try adding the pool member 80 alone and use this pool and check whether it is going to work or not. if it didn't work, check the backend server itself and try to access it directly.