Configuring Syslog Server in F5 to send all logs

Hi,

 

 

1. Create route (or check default gateway on management interface)

 

tmsh create sys management-route IP_SYSLOG gateway IP_GATEWAY_ADMIN

 

 

2. Delete previous syslog configuration (if it was)

 

tmsh modify sys syslog include none

 

 

3. Configure syslog (At least use this command, if you work with UDP syslog, just replace tcp by udp)

 

tmsh modify sys syslog include "destination remote_server {tcp(\"IP_SYSLOG\" port (514));};filter f_alllogs {level (debug...emerg);};log {source(local);filter(f_alllogs);destination(remote_server);};"

 

 

4.Commit the configuration

 

tmsh save sys config

 

 

 

Pay attention to replace IP_SYSLOG and IP_GATEWAY_ADMIN in your command.

 

 

Regards,

 

Als.

HI ,

 

 

Thanks for the Update , Could you please tel me Were should i configure Smtp setup in F5 version 10.2 , AS i required to send log message to My mail id but F5 is sending to wrong smtp mail server , Kindly help on this

HI ,

 

 

Thanks for the Update , Could you please tel me Were should i configure Smtp setup in F5 version 10.2 , AS i required to send log message to My mail id but F5 is sending to wrong smtp mail server , Kindly help on this

Could you please tel me Were should i configure Smtp setup in F5 version 10.2is this what you are looking for?

 

 

Syslog NG Email Configuration by lrhazi (Mohamed Lrhazi)

 

http://devcentral.f5.com/wiki/AdvDesignConfig.SyslogNGEmailConfiguration.ashx

Hi,

 

 

Thanks for the Information , I am looking same as you provided , but unable to send mail when i send a test mail manually.

 

 

From the logs i can see that its sending to Different SMTP server , could you please tel me where should SMTP configuration in F5

 

 

Below are mailq logs.

 

 

mailq

 

-Queue ID- --Size-- ----Arrival Time---- -Sender/Recipient-------

 

05CC91803E 313 Tue Jan 31 10:33:32 root@RYDGOS1GSNLB01.YESSER.EGOV

 

(Host or domain name not found. Name service error for name=yesser.gov.sa type=MX: Host not found, try again)

 

asaco.mmohan@yesser.gov.sa

 

 

Regards,

 

Midhun P.K

could you please tel me where should SMTP configuration in F5 it depends on software version. it is either postfix or ssmtp.

 

 

sol9445: The BIG-IP third-party software matrix

 

http://support.f5.com/kb/en-us/solutions/public/9000/400/sol9445.html

sol7365: Configuring the BIG-IP system to deliver locally generated email messages without using DNS

 

http://support.f5.com/kb/en-us/solutions/public/7000/300/sol7365.html

 

 

sol3664: Configuring the BIG-IP system to deliver locally generated email messages (9.x - 10.x)

 

http://support.f5.com/kb/en-us/solutions/public/3000/600/sol3664.html

 

 

sol13180: Configuring the BIG-IP system to deliver locally generated email messages (11.x)

 

http://support.f5.com/kb/en-us/solutions/public/13000/100/sol13180.html

 

 

hope these help.