Forum Discussion
NimbostratusConfigSync issue on v.11.4.1 HF3 (update on 14/8/2014)
Hi Everybody,
I've HA pair with LTM v.11.4.1 HF3 , When I try to sync from Active unit to standby unit (by manage from standby unit). I got error when try to sync.
and when I try to sniff-update to see what problem It got error
Anybody experience this problem or know how to fix this?
Thank you in advance
12 Replies
- nitass
Employee
have you checked /var/log/ltm in peer unit? look for mcpd log. it may give some clue.
nitass_89166Noctilucent
have you checked /var/log/ltm in peer unit? look for mcpd log. it may give some clue.
kridsanaCirrocumulus
I forget to say that we can't access active unit due to unknown issue.- nitass_89166i think you had better fix accessibility issue before starting troubleshooting this issue.
- kridsana
mcpd log that show is just like the picture
no another mcpd log show
LyonsG_85618Cirrostratus
Hi
have you seen the following thread?
http://support.f5.com/kb/en-us/solutions/public/13000/900/sol13946.html
I had similar issues and i ended up restarting the mcpd process to resolve problem.
Graham
- kridsana
I forget to say that we can't access active unit due to unknown issue.
- LyonsG_85618
Looks like a reboot of active unit may be in order?
- LyonsG_85618
Looks like a reboot of active unit may be in order?
When you say you can not access the active device, is this via the mgt interface only, or all SelfIPs as well (if you have default allow options on those)? are you able to ping/telnet from the standby device to the active on your Sync interface? (e.g. ping 1.1.1.1).
Are all the interfaces connected to the same switch infrastructure as it is quite serious that the point-to-point link between devices is an issue.
