Forum Discussion

A__N_5261's avatar
A__N_5261
Icon for Nimbostratus rankNimbostratus
Jan 21, 2013

Command to Verity Outbound Traffic

Hi All,     We have server in 192.168.195.0/24 ( Pool Member), And default gateway is BIG IP (192.168.195.1). Setup is like this     FW----------------------------------- ...
config
design
nitass's avatar
nitass
Icon for Employee rankEmployee
Jan 21, 2013
1. can we see connection of flow , With any command ? b conn or tmsh show sys connection command.

bigpipe 

NAME
       conn command - Displays, deletes, or sets idle timeout for active connections on the BIG-IP system.

SYNTAX
       Use this command to display, delete, or set idle timeout for active connections on the BIG-IP system.

CREATE/MODIFY
        bigpipe conn ( â all) [{]  [}]
           ::=
             [client ( â )] \
                [server ( â )] \
                [ss client ( â )] \
                [ss server ( â )] \
                [(any â local â mirror)] \
                [protocol ] \
                [age ]
           ::=
             idle timeout ( â immediate â indefinite)

DISPLAY
        bigpipe conn [ â all] [show [all]]
        bigpipe conn ( â all) age [show]
        bigpipe conn ( â all) client [show]
        bigpipe conn ( â all) idle timeout [show]
        bigpipe conn ( â all) protocol [show]
        bigpipe conn ( â all) server [show]
        bigpipe conn ( â all) ss client [show]
        bigpipe conn ( â all) ss server [show]

tmsh 

root@ve10(Active)(tmos) show sys connection ?
Options:
  all-properties  Display all properties for the specified items
  default         Units are determined based on current values
  gig             All values are displayed in giga-units
  kil             All values are displayed in kilo-units
  meg             All values are displayed in mega-units
  raw             No conversions are made to any values
  |               Route command output to a filter
Properties:
  "{"             Optional delimiter
  age             Specifies the age, in seconds, of a connection
  cs-client-addr  Specifies the clientside remote address of the active connections
  cs-client-port  Specifies the clientside remote port of the active connections
  cs-server-addr  Specifies the clientside local address of the active connections
  cs-server-port  Specifies the clientside local port of the active connections
  protocol        Specifies the protocol used for specified connections (for example: tcp, udp)
  ss-server-addr  Specifies the serverside remote address of the active connections
  ss-server-port  Specifies the serverside remote port of the active connections
  type            Specifies the connnection type used for specified connections (for example: any, mirror, self)