Command for disabling http access for management

Hi!

Have you tried this article?

http://support.f5.com/kb/en-us/solutions/public/13000/300/sol13309.html

/Patrik

Note that I don't think this applies to the iControl SOAP and REST interfaces. If you want to disable everything you may need to consider shutting down the httpd and tomcat daemons on start-up.

If you don't mind about the iControl stuff your suggestion is valid I would have thought. I've no option to test right now but using a tmsh command try this and see if there is a None option;

[tmsh] modify sys httpd allow replace-all-with ...

let me test it for you. 😉

root@(ve11a)(cfg-sync In Sync)(Active)(/Common)(tmos) modify sys httpd allow none

root@(ve11a)(cfg-sync In Sync)(Active)(/Common)(tmos) list sys httpd allow
sys httpd {
    allow none
}

root@(ve11a)(cfg-sync In Sync)(Active)(/Common)(tmos) list sys db service.httpd.allow
sys db service.httpd.allow {
    value ""
}

let me test it for you. 😉

root@(ve11a)(cfg-sync In Sync)(Active)(/Common)(tmos) modify sys httpd allow none

root@(ve11a)(cfg-sync In Sync)(Active)(/Common)(tmos) list sys httpd allow
sys httpd {
    allow none
}

root@(ve11a)(cfg-sync In Sync)(Active)(/Common)(tmos) list sys db service.httpd.allow
sys db service.httpd.allow {
    value ""
}

Thanks much for all your help