Forum Discussion
Rajesh_Loki_war
Nimbostratus
Nimbostratuscheck connections from one VIP to other
Hi All,
I have created a new setup where i have a main VIP in which i have created an Irule, depending on the keyword it will send traffic to child VIPS where actual servers reside. This setup i...
jaikumar_f5
Noctilucent
NoctilucentI aint 100% sure, but here's what I know. The connections table tells you 4 fields,
cs-client-addr --> cs-server-addr --> ss-client-addr --> ss-server-addrAssume the below,
Client IP - 10.10.10.10 VIP - 20.20.20.20 Self IP - 25.25.25.25 Pool Member - 30.30.30.30
tmsh show sys connection cs-client-addr 10.10.10.10
Result would show you client IP and the VIP and the Self IP and the Pool member to which it load balanced too. You can use the all-properties to see the clientside connection and serverside connection details.
Sys::Connections
10.10.10.10:50915 20.20.20.20:443 25.25.25.25:50915 30.30.30.30:443 tcp 1 (tmm: 5) none
The
cs-client-addr,cs-server-addr,ss-client-addr,ss-server-addrtmsh show sys connection cs-client-addr 10.10.10.10 cs-server-addr 20.20.20.20 ss-server-addr 30.30.30.30 all-propertiesSo if you want to see the traffic on the Child VIP, you should specify the child VIP as the filter, and here the Child VIP will be the cs-server-addr since the main VIP is the source. Haven't tested, but please try the below,
tmsh show sys connection cs-server-addr CHILD-VIP1or even simpler would be to do a grep in the show sys connection.
tmsh show sys connection | grep CHILD-VIP1
