Cannot see ip address via cli
Hi
IP address is configured for vlan. Why the ip address cannot be seen via below command? thanks
root@(F5-112)(cfg-sync Standalone)(Active)(/Common)(tmos)# list net interface all
net interface 1.1 {
if-index 48
mac-address 00:50:00:00:0f:01
media-fixed 10000T-FD
media-max auto
mtu 9198
}
net interface 1.2 {
if-index 64
mac-address 00:50:00:00:0f:02
media-fixed 10000T-FD
media-max auto
mtu 9198
}
net interface 1.3 {
if-index 80
mac-address 00:50:00:00:0f:03
media-fixed 10000T-FD
media-max auto
mtu 9198
}
net interface mgmt {
if-index 32
mac-address 00:50:00:00:0f:00
media-active 100TX-FD
}
Hi davidy2001 ,
use this commend :root@(lab-ans)(cfg-sync Standalone)(Active)(/Common)(tmos)# list net self all-properties
you should see each self ip address and all relevant configurations.
>AS Enes_Afsin_Al said , when you issued this command : (list net interface all) , you are viewing the properities of interface itself , this interface assigned to multiple Vlans which we call it " sub-vlans " , so that imagine you have 1000 vlans with 1000 self ips and you need to assign them to interfaces , it does not make sense to get these ips under interface itself when you issue {list net interface all}
> Vlans are the main controller in your network configuration and choosing ips.
the best way to see all ips and their assigned Vlans is to list all of your self ips address , you see each self name , ips and its own vlan.
Regards