Forum Discussion
NimbostratusBIGpipe class operation error
After add a new monitor into my configuration with Webclient, i executed "b load" to reload configuration files, but the problem starts.
Executing "b load":
[root@bigip:Active] config b
load
Reading configuration from
/defaults/config_base.conf.
Reading configuration from
/config/bigip_base.conf.
Reading configuration from
/config/bigip_sys.conf.
Reading configuration from
/usr/bin/monitors/builtins/base_monitors.conf.
Reading configuration from
/config/profile_base.conf.
Reading configuration from
/config/daemon.conf.
Reading configuration from
/config/bigip.conf.
Reading configuration from
/config/bigip_local.conf.
Loading the configuration
...
BIGpipe class operation
error:
01070712:3:
Caught configuration exception (0), Invalid string query key field, too long,
length:99746 class:class_string_item key:class_tree field:value -
EdbQueryKey.cpp, line 247.
Thank you for your help
14 Replies
- Chris_Miller
Altostratus
What's your monitor look like? 
mferpan_60559Hi Chris, thank you for your help. Here is Pool definition:
pool pool_ws03_afa {
lb method member ratio
monitor all TCP_8080 and monitor_ws03_afa
members
yyy.yyy.yyy.yyy:webcache
xxx.xxx.xxx.xxx:webcache
ratio 2
}
Regards- Chris_MillerPosted By mferpan on 08/24/2010 02:04 AM
Hi Chris, thank you for your help. Here is Pool definition:
pool pool_ws03_afa {
lb method member ratio
monitor all TCP_8080 and monitor_ws03_afa
members
yyy.yyy.yyy.yyy:webcache
xxx.xxx.xxx.xxx:webcache
ratio 2
}
Regards
What's the actual monitor_ws03_afa monitor doing? - mferpan_60559It's monitoring epplication response
Checks /application/url/isok if everything's ok http 200 ok - Chris_MillerPosted By mferpan on 08/26/2010 01:13 AM
It's monitoring epplication response
Checks /application/url/isok if everything's ok http 200 ok
Can you remove the monitor from your config temporarily to see if that's your problem? - mferpan_60559yes, and i did it, but the problem persists
- Chris_MillerPosted By mferpan on 08/26/2010 05:42 AM
yes, and i did it, but the problem persists
Don't suppose you have a support contract? I'd recommend going into "/config" and comparing your bigip.conf to whatever backup file you have on there, probably bigip.conf.bak" - mferpan_60559Thank you Chris.
I've restored bigip.conf too, but the problem is the same.
Regards - Chris_MillerPosted By mferpan on 08/26/2010 08:47 AM
Thank you Chris.
I've restored bigip.conf too, but the problem is the same.
Regards
This one's beyond me then...I'd recommend a "full_box_reboot" but am afraid of your config not loading at all...wish I knew what file load was causing the issue. - Can you post what's on line 247 of yoru bigip.conf file?
