Forum Discussion
Jeremy_Hobbs_18
Nimbostratus
NimbostratusBIGIQ sync issue
I have BIGIQs is a HA Peer Group. We updated the software and the 02 device reverted to using the default IP address for the 01 device. This caused the pair to go out of sync. I went into the 02 d...
On your 01 device, delete the 02 device from your HA Peer System group (under BIG-IQ system). Verify that the UI says Standalone in the upper left.
On your 02 device, delete the 01 device from your HA Peer System group. Verify that the UI says Standalone in the upper left.
When both devices are in standalone, choose the device that you want to be the active device and add the other device to the HA peer system group from that device. This should re-establish the HA relationship.
On your 01 device, delete the 02 device from your HA Peer System group (under BIG-IQ system). Verify that the UI says Standalone in the upper left.
On your 02 device, delete the 01 device from your HA Peer System group. Verify that the UI says Standalone in the upper left.
When both devices are in standalone, choose the device that you want to be the active device and add the other device to the HA peer system group from that device. This should re-establish the HA relationship.
Jeremy_Hobbs_18Nimbostratus
NimbostratusI attempted the steps you recommended, however it still was giving me the error. I performed the steps again, but rebooted both devices before adding the 02 device as the peer and it worked that time.