For more information regarding the security incident at F5, the actions we are taking to address it, and our ongoing efforts to protect our customers, click here.

Forum Discussion

Aviv's avatar
Aviv
Icon for Cirrus rankCirrus
Dec 10, 2015

Bigip HA sync Problem

Hi! we have 2 Units of f5 ver 12 in HA . someone,by mistake start to create objects and a vs in the standby unit. when he saw that he is in the standby unit he started to create the some objects at...
application delivery
BIG-IP
TMOS
Aviv's avatar
Aviv
Icon for Cirrus rankCirrus
Dec 12, 2015

Hi!

 

I have tried the solution but it didn't worked for me. i get this now:

 

Sync Summary Status Sync Failed Summary A validation error occurred while syncing to a remote device Details Sync error on TVLF5-02.com: Load failed from TVLF5-01.com 01070734:3: Configuration error: Modify of node attribute is not permitted. Recommended action: Review the error message and determine corrective action on the device

 

any suggestions?

 

Thanks, Aviv

 

StephanManthey's avatar
StephanManthey
Icon for Nacreous rankNacreous
Dec 13, 2015
Hi Aviv, I guess, the configuration is somehow inconsistent. As you mentioned, changes were applied to both units. A logical configuration change (nodes, pool members, virtual servers etc.) should be synchronized in "overwrite" sync mode. If changes were applied to VLANs and self IPs it might become more complicated as the object names have to match in your cluster and i.e. for floating self IPs (which will be synced a VLAN and a matching self IP have to exist on the peer device). I am wondering, if you can locally save the configuration on command line: tmsh save sys config tmsh save sys ucs backup_bigip_date.ucs Thanks, Stephan