Forum Discussion
NimbostratusBigIP getting rebooting contiouslly after platform migrate
we migrating the F5 device (BIG-IP 12.1.2 Build 2.0.276) to new device (BIG-IP 12.1.3.5 Build 0.0.10
) using UCS platform migrate.
platform migrate successfully completed. but after that device staring rebooted continuously..
System log:
Sun May 24 03:45:06 BST 2020 notice bigip-01-temp syslog-ng[14713] Configuration reload request received, reloading configuration;
Sun May 24 03:45:07 BST 2020 notice bigip-01-temp pendsect[3371] skipping drive -- Model: WDC WD1005FBYZ-01YCBB2
Sun May 24 03:45:07 BST 2020 notice bigip-01-temp pendsect[3371] No known drives detected for pending sector check. Exiting
Sun May 24 16:43:26 BST 2020 notice bigip-01 syslog-ng[17426] syslog-ng starting up; version='2.1.4'
Sun May 24 16:47:24 BST 2020 notice bigip-01 boot_marker ---===[ HD1.1 - BIG-IP 12.1.3.5 Build 0.0.10 <HD1.1> ]===---
Sun May 24 16:47:26 BST 2020 notice bigip-01 syslog-ng[2895] syslog-ng starting up; version=\'2.1.4\'
Sun May 24 16:48:09 BST 2020 notice bigip-01 syslog-ng[2895] Configuration reload request received, reloading configuration;
Sun May 24 16:48:31 BST 2020 notice bigip-01 logger /etc/rc3.d/S57fw_update_post status=0 from download of /usr/firmware/hsbe2v4_atlantis/hsb_5SGXMA3H2F35C2_t34806110_v4.0.22.1_d17.01.03.78.bit
Sun May 24 16:49:28 BST 2020 notice bigip-01 syslog-ng[2895] Suspending write operation because of an I/O error; fd='36', time_reopen='60'
Sun May 24 16:49:28 BST 2020 notice bigip-01 syslog-ng[2895] Suspending write operation because of an I/O error; fd='37', time_reopen='60'
Sun May 24 16:49:28 BST 2020 notice bigip-01 syslog-ng[2895] Suspending write operation because of an I/O error; fd='38', time_reopen='60'
Sun May 24 16:49:33 BST 2020 notice bigip-01 setsebool The allow_dynad policy boolean was changed to on by root
Sun May 24 16:49:53 BST 2020 notice bigip-01 syslog-ng[2895] Configuration reload request received, reloading configuration;
Sun May 24 16:53:37 BST 2020 notice bigip-01 syslog-ng[2895] Suspending write operation because of an I/O error; fd='47', time_reopen='60'
Sun May 24 16:53:37 BST 2020 notice bigip-01 syslog-ng[2895] Suspending write operation because of an I/O error; fd='48', time_reopen='60'
Sun May 24 16:53:37 BST 2020 notice bigip-01 syslog-ng[2895] Suspending write operation because of an I/O error; fd='50', time_reopen='60'
Sun May 24 16:55:03 BST 2020 notice bigip-01 boot_marker ---===[ HD1.1 - BIG-IP 12.1.3.5 Build 0.0.10 <HD1.1> ]===---
Sun May 24 16:55:05 BST 2020 notice bigip-01 syslog-ng[2898] syslog-ng starting up; version=\'2.1.4\'
Sun May 24 16:55:49 BST 2020 notice bigip-01 syslog-ng[2898] Configuration reload request received, reloading configuration;
Sun May 24 16:56:11 BST 2020 notice bigip-01 logger /etc/rc3.d/S57fw_update_post status=0 from download of /usr/firmware/hsbe2v4_atlantis/hsb_5SGXMA3H2F35C2_t3
7 Replies
- Lidev
Nacreous
Hello,
Check the liveinstall.log (/var/log/liveinstall.log) maybe you see any install errors ?
Regards
BalasubramaniyaNo such logs / log file....
- Balasubramaniya
No Such log file there in /var/log
bigip-01-temp:Active:Changes Pending] log # cd /var/log
bigip-01-temp:Active:Changes Pending] log # ls -ltr | grep liveinstall
-bigip-01-temp:Active:Changes Pending] log # cat liveinstall.log
cat: liveinstall.log: No such file or directory
- Lidev
what's the output of the tmsh commande below :
tmsh show /sys software status- Balasubramaniya
[bigip-01-temp:Active:Changes Pending] log #
re statuss-msl-bigip-01-temp:Active:Changes Pending] log # tmsh show /sys softwa
-----------------------------------------------------
Sys::Software Status
Volume Product Version Build Active Status
-----------------------------------------------------
HD1.1 BIG-IP 12.1.3.5 0.0.10 yes complete
HD1.2 BIG-IP 14.0.0 0.0.2187 no complete
HD1.3 none none none no complete
- Lidev
The installation went well, but it looks like you have a disk problem (No drives detected, I/O errors..) maybe look to this way.
- Balasubramaniya
Installation went smooth no errors too... after some time devices started to reboot continuously. when change to old backup device become normal. how to proceed further with this error.
