BIG IP pings all addresses.

Please read this article.

 

Controlling the BIG-IP ARP and ICMP echo response behavior for a virtual address.

 

Hi,

for disabling icmp ping in your vs you can follow this procedure:

Be carefull don't disable arp because your VS will not be reacheabl. so follow this procedure:

• Log in to the Traffic Management Shell (tmsh) by typing the following command:

tmsh

• Configure the desired ICMP Echo setting for a virtual address by using the following command syntax:

modify ltm virtual-address  icmp-echo disabled

• Save the change by typing the following command:

save /sys config

You can of course do it using GUI:

• Virtual address
• selecte your IP /Virtual address* then uncheck icmp-echo

For prevent icmp/ping in your selfIP/floatin/Snat POOl, you can use Packet Filter:

https://support.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/tmos-implementations-11-4-0/26.html

regards,