Forum Discussion
ACE to BIGIP migration
Hi,
I'm trying to find equivalent config in BIGIP for the below ACE config. Tried using ace to f5 converter script, but gets error - "can't read file". Can someone help me with the config i should be doing on BIGIP please? Class map/Policy nap is the confusing part for me.
probe icmp adfax-probe interval 30 passdetect interval 30 passdetect count 1
rserver host adfax02 ip address 10.100.201.113 inservice rserver host adfax03 ip address 10.100.201.59 inservice
serverfarm host adfax rserver adfax02 probe adfax-probe inservice rserver adfax03 probe adfax-probe inservice
sticky ip-netmask 255.255.255.255 address source stickyadfax serverfarm adfax
class-map match-any adfax 2 match virtual-address 10.100.205.55 any
policy-map type loadbalance first-match PM-adfax class class-default serverfarm adfax
policy-map multi-match L4-adfax class adfax loadbalance vip inservice loadbalance policy PM-adfax loadbalance vip icmp-reply nat dynamic 105 vlan 105
interface vlan 105 service-policy input L4-adfax
1 Reply
- jaikumar_f5
Noctilucent
Well you can take a look on these below links,
https://devcentral.f5.com/articles/converting-a-cisco-ace-configuration-file-to-f5-big-ip-format
https://devcentral.f5.com/wiki/advdesignconfig.Cisco.ashx
Help guide the future of your DevCentral Community!
What tools do you use to collaborate? (1min - anonymous)Recent Discussions
Related Content
* Getting Started on DevCentral
* Community Guidelines
* Community Terms of Use / EULA
* Community Ranking Explained
* Community Resources
* Contact the DevCentral Team
* Update MFA on account.f5.com