zebos
5 TopicsZebOS VTY Config locked by other VTY
In ZebOS, I lost my connection to the F5 and then restored it only to find out I couldn't get into configuration mode because the VTY line was locked from doing any configuration. conf t VTY configuration is locked by other VTY show users Line User Host(s) Idle Location 130 vty 0 idle 00:10:13 0 131 vty 1 idle 00:00:10 1 In Cisco, I could just clear the vty line to end that session, however it doesn't appear to be that simple in F5. How can I terminate the other session or just fix that error? The two solution I have that are not quick is to wait for that session to just time out or reboot the device.1.1KViews1like0CommentsDynamic routing is not enabled in route domain 0
I got a BIG IP Lab Licensed virtual copy and try to run ZebOS(imish) shell on the virtual machine. However, ./imish binary always prints out this message: "Dynamic routing is not enabled in route domain 0" I already enabled dynamic routing protocols of route domain 0 by following the procedures in this document ( https://support.f5.com/kb/en-us/solutions/public/13000/800/sol13802.html ). Is there anyone who can help me solve this problem? I'd really appreciate any help you can provide.774Views0likes2CommentsCreate net routing bgp issue, RCI for BGP and BFD (ZebOS to tmsh ROUTING)
Hello, I am trying to migrate a BGP configuration from ZebOS to tmsh tmsh to test the new functionality of 13.1.0 (Routing Configuration Integration (RCI) for BGP and BFD). I activate TMOS ROUTING by: tmsh modify sys db tmrouted.tmos.routing value enable. when I try to configure the TMOS BGP by: create net routing bgp TEST local-as 65540, I have this error message : [api-status-warning] net / routing / bgp is early_access 01071c3f: 3: Can not mix routing-protocol Legacy and TMOS mode for route-domain (/ Common / 0). Any idea please ???636Views0likes2CommentsDefault Route into OSPF
I am unable to advertise a default route 0.0.0.0/0 from the F5 into ospf. I have an F5 VE running 12.1.1 on KVM-QEMU. IMI is running and I have neighbor relationships with the appropriate routers. All other routes that I test are added without issues, but I do not see the 0.0.0.0/0 route being advertised into ospf. MY ZebOS config: [root@F5-INTERNET-01:Active:In Sync] config cat zebos/rd0/ZebOS.conf ! no service password-encryption ! interface lo ! interface tmm ! interface Core ip ospf priority 0 ip ospf mtu-ignore ! interface Internet ! router ospf ospf router-id 10.246.3.250 redistribute kernel passive-interface Internet network 10.246.3.0 0.0.0.255 area 0.0.0.0 ! line con 0 login line vty 0 39 login ! end Here is the LTM Configuration: ltm virtual /Common/Test { destination /Common/0.0.0.0:0 ip-protocol tcp mask any profiles { /Common/fastL4 { } } source 0.0.0.0/0 translate-address enabled translate-port disabled } ltm virtual /Common/test2 { destination /Common/10.10.10.1:80 ip-protocol tcp mask 255.255.255.255 profiles { /Common/tcp { } } source 0.0.0.0/0 translate-address enabled translate-port enabled } ltm virtual /Common/test3 { destination /Common/20.20.20.0:0 ip-protocol tcp mask 255.255.255.0 profiles { /Common/tcp { } } source 0.0.0.0/0 translate-address enabled translate-port disabled } ltm virtual-address /Common/0.0.0.0 { address any arp disabled icmp-echo disabled mask any route-advertisement enabled server-scope none traffic-group /Common/traffic-group-1 } ltm virtual-address /Common/10.10.10.1 { address 10.10.10.1 arp enabled icmp-echo enabled mask 255.255.255.255 route-advertisement enabled server-scope none traffic-group /Common/traffic-group-1 } ltm virtual-address /Common/20.20.20.0 { address 20.20.20.0 arp disabled icmp-echo disabled mask 255.255.255.0 route-advertisement enabled server-scope none traffic-group /Common/traffic-group-1 } What is the issue?542Views0likes1Comment